Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
If you are grappling with the problem of choosing a woodwork colour to go with neutral walls, check out Architectural Colours by David Oliver, the founder of Paint & Paper Library. He arranged his off-whites for ceilings, cornices, walls and woodwork in chromatical groups and the concept has been so well received that chromatically arranged colours, such as soft greys, greens and pinks, have been introduced.
Even if you don't need to apply a coat of primer before your new coats of paint, doing so will always save you money. Whether you use white or tinted primer, a coat of primer is always more cost effective for one simple reason: It is cheaper! In fact, primer may cost as little as half as much as standard paint. If you get it tinted the same as your paint, then it is cheaper by the coat. If you use white, as in the first scenario above, it will also minimize the number of coats of paint you have to apply. Either way it reduces how much paint you have to buy. Do you want to learn more about maximizing your paint color coverage, minimizing your paint usage, optimizing coats, and perfecting your primer?
Cement-water paints are best suited for application to basement walls which are damp as a result of leakage or condensation. To apply these paints, the same procedure should be followed as is described here for painting exterior masonry walls.
Complementary colors are opposites, and if you look at a color wheel, they are directly across from each other. While complementary colors may seem kind of mysterious to a novice, you just have to bring to mind Christmas to find a great example that is familiar to everyone, red and green.By simply making these colors a little paler, you can make this color palette work really well. Color tones are important, because rust and moss, while still being red and green, do not scream 'Christmas'. If your choice of tones is bold, you will create an eye popping design. However, it is common to get off course.
Specialist paints also include some exciting new finishes, such as suede effects, metallics and high-sheen lacquers. Judy Smith, colour consultant at Crown, suggests an accent wall in one of these to lift a neutral scheme. Crown's Feature Wall range, which includes eight metallic finishes, nine bright colours and a highly reflective Pure Brilliant White, comes in convenient 1.25 litre tins.
Usually on exposed air ducts of galvanized metal a primer coat of zinc dust-zinc oxide paint is used, before the finish coat is applied.