A miniature painting, as the name signifies, is an intricate, colorful illuminations or painting, small in size, executed meticulously with delicate brushwork. The colors used in miniatures are generally derived from natural sources and materials. Some of the paintings use pure gold and other precious gems and stones to extract the colors for beautifying these miniature paintings. India has a long and varied tradition of miniature paintings.
Water-thinned rubber-latex paint is already an old reliable, though it is only about 10 years old. It accounts for a big percentage of all paint sold and is still the most widely available of the easy-to-use finishes. One new type is a combination vinyl-rubber paint that is said to do a better job on interiors than either vinyl or rubber alone because it dries faster, lasts longer and has less sheen.
Color can make a big difference in your life. I know from experience. Before I learned my right colors, I had a closet full of right and wrong colors. Of course, the colors did not work together and definitely did not coordinate. I had no idea of the difference that coordinated colors can make. Further, I had a drawer full of lipsticks some with gold undertones and some with blue undertones.
Once you figure out which position is prime and which position is spray, place the valve in the prime position and grab the primer hose. Point the primer hose in the empty bucket near the top and at an aproxx.45 degree angle from the side (the reason for this is that there is likely to be pressure still built up in the airless and when you first switch on the airless to prime it, paint will likely burst out of the primer hose and you don't want to have it go everywhere). Now turn the airless paint sprayer on and you will see that the airless is sucking up the new paint and pumping out the primer hose. At first you will typically see a cleaning solution come out followed by your paint. When you see your paint coming out switch over the primer valve to the other position and you will see the airless pumping paint into the main hose.
Always use a sanding block for flat surfaces. Just your hand behind a thin piece of sand paper can leave grooves and low spots. It's also easier on your hands. For inside curves try wrapping the sand paper around a short section of garden or heater hose. This will help approximate the concave curve and help stay away from sanding through hard edges. On hard edges, like the top ridge of a fender or leading edge of a hood, you need to do this by hand. A sanding block will quickly dig right through the paint on a hard edge and take you down to bare metal. This means primer and more sanding.
Usually on exposed air ducts of galvanized metal a primer coat of zinc dust-zinc oxide paint is used, before the finish coat is applied.
Reasons to Use Primer with Paint. Primer plays 2 important roles in painting projects. Firstly, if you are painting a wall that has never been painted (with water-based paint) before, primer will allow your new paint to stick (or "mechanically bond") to the surface. Since primer is typically not necessary if the wall has previously been painted, many people skip this step. Unfortunately, doing so negates its 2nd (often, more valuable) role in color coverage.