Paints in powdered form require the addition of a liquid to prepare them for use. The manufacturer's directions as to the amount of oil, varnish, water, or other vehicle required should be followed. Indian artists employed multiple perspectives unlike their European counterparts in their paintings. The idea was to convey reality that existed beyond specific vantage point. Some of the special Miniature paintings include illustrated manuscripts of Jains and Buddhists, the flowering of the Mughal, Rajput and Deccan miniatures. Themes used were from Indian epics like Ramayana, Mahabharata, Bhagvata Purana, Rasikpriya, Rasamanjiri as well as ragas of Indian classical music, etc. Practically every manufacturer has a "color system," a fat book of color chips with instructions for duplicating each chip. This is accomplished by intermixing cans of colored paint, by adding a concentrated color to a can of white or colored paint, or by adding concentrated color or colors to a can of neutral "base" paint. And for those who don't want any guesswork there's the Color Carousel that mixes the paints right in the store. Whatever the method, the result is a range of colors such as no amateur painter has seen.
Five categories are used to describe VOC content. For guidance, a minimal VOC content is up to 0.29 per cent, whereas a very high VOC content is above 50 per cent. All brands have, where necessary, reformulated their ranges to give minimal VOC content. TEMPERATURE OF COLOR. Colors have temperature, referred to as warm or cool. In painting, reds, yellows and oranges are referred to as warm colors and blues, violets and greens are referred to as cool colors. One of the biggest lessons you will ever learn about color temperature though, is that the appearance of color can change drastically depending on its surroundings. For instance, a certain yellow would appear much hotter if it were surrounded by a violet then say an orange. Another important lesson in color temperature: Warm colors will advance in a painting and cool colors recede. A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat. Select the right product. There is a dedicated paint for practically every surface, including tiles and appliances, such as fridges. For high-traffic areas consider scuff-resistant multi-surface paints that can be used on both wood and walls. Kitchens and bathrooms benefit from specialist formulas designed to cope with humidity without flaking.