Paste and powder paints should be mixed in quantities sufficient for immediate use only, as these materials often become unfit for application if allowed to stand for three or more hours.
One precaution: You can't paint with it in cold weather. The chemical reaction that transforms the water solution into a durable finish will not take place if the temperature is below 50°. (Conventional oil paints don't stick well in cold weather, either.)
Basically what you're looking for is a good, solid foundation of existing paint that is stable and still strongly bonded to the car. Many times an original factory paint job, even after decades will meet these criteria.
Is the light neutral, sharp, mystical?
The salt and alum should be dis-solved in 4 gallons of hot water, after which the molasses may be added to the mixture. The resulting clear solution is then added to the lime paste, stirred vigorously, and thinned with water to the desired consistency. This whitewash has a yellow tinge when first applied, but the color disappears in a few days leaving a white film.
What are the major color fields in the painting and their role in the entire composition? Is the light optically realistic or expressive as in Matisse's painting?
Concrete Floors. Two general types of paints for concrete floors are varnish and rubber-base paint. Each has its limitations and the finish cannot be patched without the patched area showing through. Floor and deck enamel of the varnish type gives good service on concrete floors above grade where there is no moisture present.