Primer paints may be oil- or water-based and are used to seal unpainted surfaces to prevent covering coats of paint soaking in. The appropriate type of primer should be used for the surface being painted - wood, metal, plaster or tiles. There are some 'all purpose primers' available which are designed for two or more of these surfaces. Hope this helps you in deciding complete exterior paint job, or partial trim only exterior paint job, saving painting costs when you can, from your local area painting contractor. Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges.
The lite version of Galkyd is simply thinner. I use it more than the other. I love it. Paintings I did 16 years ago using Galkyds look as pristine as the day I painted them. You'll also need a canvas and some paint. I buy a tube of red, green, blue, purple, yellow, brown, white and black. I prefer what's called Ivory Black and a soft mixing white as you'll add white to a lot of different colors to make lighter versions. From these basic colors you can make any exotic color by mixing them in combination's. Be creative and experiment. And don't be afraid of color, because color is the most popular in museums! The bright paintings are historically the crowd favorites. As for color variety from these basic colors, mix red and white to make pink, mix yellow with green to make lime green, white with blue to make light blue, white with black to make gray, etc. Use your common sense and play with it! You'll also need pencils, an eraser and some Turpentine or Turpentine substitute. Keep your brushes soaking in it in a plastic cup to keep them clean and ready for your next color choice.... and to keep them from drying out. Plaster. New dry plaster in good condition, which is to be finished with a paint other than water paint, should be given a coat of primer-sealer and allowed to dry thoroughly before being inspected for uniformity of appearance. Variations in gloss and color differences in the case of tinted primers indicate whether or not the whole surface has been completely sealed. If not, a second coat of primer-sealer should be applied. If only a few "suction spots" are apparent, a second coat over these areas may be sufficient. Alkyd is an old interior paint made newly popular by a change in solvent - a super-refined petroleum chemical that has almost no odor. It is not a water paint. You thin it and clean brushes with mineral spirits or turpentine, or, if you want to retain the odorless feature, with the new odorless solvent. (Ask the paint-store man for just that, odorless solvent). Masonry paints come in a wide variety of finishes, from textured to ultra-smooth. Opt for a texture if you need to disguise fine surface cracks. If you favour traditional finishes, then consider limewash, which is available from specialists such as Francesca's Lime Wash. The beauty of this paint is that it will mellow and weather with time. However, do check with the supplier first to ensure that the surface is suitable for this finish.