When it comes to rolling out the walls never ever use a cheap foam roller. Foam rollers never evenly absorb the paint out of the pan and will actually add time to you project and cause more mess. Buy yourself a synthetic professional 3/8 nap roller head for about $6 to $8. Not only will the paint be applied in a smoother fashion you will experience less work and mess.
The paints may be applied by brush or spray; the small spray attachment for vacuum cleaners is very convenient, especially for painting radiators.
HUE-VALUE-INTENSITY. Hue: Without getting too technical, and to put things into laymen's terms, hue is just another word for color. For instance, grass and leaves are two variations of a green hue.
Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels.
A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.
Since the trim is the first to go, the main body of the home will be shortly behind requiring painting. If the trim was recently painted, and a few years later the body is ready for paint, all the trim will need to be covered, commonly referred to as masking off. Masking off expends time, labor and material, which adds to the bottom line cost to the remaining 40%, typically costing an additional 25% for masking trim. Thus costing 25% more after both trim and body portions are painted in separate years.
CLEAN-UP and STORAGE or DISPOSAL TIPS. · If there are paint drops on your floor, don't let it stay there. As the paint sets longer, the harder it will be cleared. Use a cloth with soap and water or a solvent for cleaning. · Use a razor-blade scraper or a putty knife to chip off bigger paint droplets that have dried. · Use a scraper to trim around windowpanes. · Wash and dry paintbrushes and rollers. Store them according to the brand's recommendation not all paintbrushes have the same type of bristles nor the rollers have the same material. · Clean the paint from the rim of the can. Tap container lids tight with a hammer and block of wood. · Store solvent-based paint cans upside down to prevent a skin from forming. · Store your paints in normal or room temperature. Never put the paints in extreme hot or cold rooms. · Each states in the U.S. or every community/ county differs on paint can disposal methods. Check your local environmental, health, and safety laws.