Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
Paste and powder paints should be mixed in quantities sufficient for immediate use only, as these materials often become unfit for application if allowed to stand for three or more hours.
A miniature painting, as the name signifies, is an intricate, colorful illuminations or painting, small in size, executed meticulously with delicate brushwork. The colors used in miniatures are generally derived from natural sources and materials. Some of the paintings use pure gold and other precious gems and stones to extract the colors for beautifying these miniature paintings. India has a long and varied tradition of miniature paintings.
Water-thinned rubber-latex paint is already an old reliable, though it is only about 10 years old. It accounts for a big percentage of all paint sold and is still the most widely available of the easy-to-use finishes. One new type is a combination vinyl-rubber paint that is said to do a better job on interiors than either vinyl or rubber alone because it dries faster, lasts longer and has less sheen.
Once you figure out which position is prime and which position is spray, place the valve in the prime position and grab the primer hose. Point the primer hose in the empty bucket near the top and at an aproxx.45 degree angle from the side (the reason for this is that there is likely to be pressure still built up in the airless and when you first switch on the airless to prime it, paint will likely burst out of the primer hose and you don't want to have it go everywhere). Now turn the airless paint sprayer on and you will see that the airless is sucking up the new paint and pumping out the primer hose. At first you will typically see a cleaning solution come out followed by your paint. When you see your paint coming out switch over the primer valve to the other position and you will see the airless pumping paint into the main hose.
You're not looking for perfection here, but you do want to eliminate every shiny spot of paint. When properly scuffed the paint should have a smooth, but dull matte finish.
By doing most of the time consuming and tedious tasks yourself, you save money. Bring a fully prepped Mustang in to your local discount paint shop and you'll be well ahead of their typical customer. Do your homework and select a good shop and you should end up with a great paint job for a great price.