Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel. Proper brush technique: When "cutting in" with a paint brush you should dip the brush in paint and tap the sides of the bucket on each side of the brush, leaving a good amount on the brush so you are able to minimize the times you will need to dip/load the brush. Next, take the brush and make a one foot to two foot line down the wall about an inch or two away from the trim or surface you are going to paint up next to, this is much like taking a knife full of butter and spreading it across an entire slice of bread. After, spreading the paint over the section, go back and even the paint out evenly across the section and cut up next to the trim with the brush. You want to paint up next to the trim or surfaced to be cut-in with the paint brush after you have released most of the paint on the wall, it is easier to cut in with the tips of the brush exposed and not loaded with a lot of paint. Alkyd has solid advantages overriding the slight cleanup in-convenience. It is exceptionally tough and very resistant to scrubbing. It stands up well in the trouble spots - trim, bathroom, kitchen. And it is easy to apply, producing a smooth, even finish free of streaks and brush marks.
Some manufacturers recommend their vinyl paints for interior as well as exterior use; others say no, not so good. There are vinyls made specifically for interiors. Malabar and Designers Guild offer some striking brights while the new Shades of Sanderson comprises 120 colours tailored to Sanderson's collections. If you are aiming for a more subtle backdrop that will flow through several rooms, it's wise to stick to neutral shades. Kevin McCloud's Elements of Colour for Fired Earth works especially well with our cool, northern light. The most flattering eye shadows are green blue, blue grays and lavender. The best eye pencils colors are in medium blues and charcoal. Lipstick and blush colors should be in rose, pink or plum colors. Let you lashes appear longer and fuller with navy or charcoal mascara. For localities where such conditions exist, self-cleaning paints should be selected. These paints are usually so designated on the label. Concrete, plaster, and metal surfaces each present special problems in painting. For instance, paint for use on masonry or new plaster must be resistant to dampness and alkalies, and paints used on steel must have rust-inhibitive properties.