Masonry Walls and Ceilings. Interior masonry walls and ceilings above grade may, in general, be painted in much the same manner as plaster surfaces. Here again, it is necessary to allow adequate time for the masonry to dry before applying paint and, in addition, attention should be given to the preparation of the surface. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions against the attack of alkali. For this purpose, alkali-resistant primers such as rubber-base paints may be used when oil paints are to follow. Paint & Paper Library arranges its colours in five shades from light to dark to help select coordinating colours for ceilings, cornices, walls, doors and woodwork. If you are decorating around bold furnishings, such as a sofa or curtains, look at paint colours from the same fabric house as they are most likely to be sympathetic. Fire-retardant paints do not resist fires completely but its fire-resistance formulation prevents it from fire in spreading fast.
When you are including the finishing touches on a area with accessories, make sure that you remember this one important thing.. It is important to know which color is dominant. Do you desire for things to stay that way? Now highlight the main color with your accessories. Using accessories like paintings, throw pillows and baskets in bolder colors can help detract attention from other parts of the room. When you have all the tools at hand, examine your exterior. You might find exterior painting problems, which could be any of the following: alligatoring, blistering, chalking, chalk run down, crackling, dirt pickup, efflorescence, fading, frosting, lapping, mildew, nail head rusting, paint incompatibility, peeling, poor alkali resistance, poor adhesion, poor gloss retention, surfacent leaching, staining, vinyl siding wrap, wax bleed, or wrinkling. Suppose it rains while you're working? Vinyl paint dries fast - as quickly as 10 to 30 minutes - and will withstand a shower after that time. It takes another 12 hours to "cure," by then forming an exceptionally tough, long-lasting film that stands up well against weather, sun, salt air and factory smoke. At a minimum you want to remove all the chrome from the car. Take off both front and rear bumpers. If your Mustang has bumperettes that are body color be sure to bring them along so they can get sprayed at the same time as the rest of the car. Remove all rocker, hood and trunk molding. Same for wheel well molding and all emblems. This would be a good time to order some new emblems and attachment hardware. Also spend some time cleaning up all the chrome with #0000 steel wool. Nothing looks worse on a fresh paint job then faded emblems and corroded, cloudy chrome.