Hope this helps you in deciding complete exterior paint job, or partial trim only exterior paint job, saving painting costs when you can, from your local area painting contractor.
Remember, you will need to clean the airless in that same fashion before you return the airless back to the rental company.
Take off the chrome molding around both the windshield and rear window. You can pick up a special tool at your local Mustang shop or by mail order that removes these quickly without scratching paint. Of course your paint is probably not in great shape at the moment, so a large flat screw driver will also do the trick. For some classic cars it makes sense to even remove the windshield, but classic Mustangs have chrome molding that will help cover any slight overspray.
Specialist paints also include some exciting new finishes, such as suede effects, metallics and high-sheen lacquers. Judy Smith, colour consultant at Crown, suggests an accent wall in one of these to lift a neutral scheme. Crown's Feature Wall range, which includes eight metallic finishes, nine bright colours and a highly reflective Pure Brilliant White, comes in convenient 1.25 litre tins.
After the siding of your home is painted you can now start on painting the trim. There are a couple different ways you can go about painting the trim of your house. The first way is to mask off all of the trim so that you can merely spray the trim color on to your house, and the second way is to roll the trim by hand. If you are the only person painting the house I would recommend rolling the trim by hand. The reason being is because it takes a long time to mask off all of the trim on your home compared to just rolling the face of the trim boards. If you have multiple people, it would be faster to have the helpers mask everything off while you start spraying the trim color.
Special paints have been innovated from different consumer insights and brilliant paint technology that allows specific paints for specific needs.
Another idea keeping Paint Brush moist until the next paint coat is applied (but not leaving for extended periods) is leaving Brush in container, wrapping top with plastic, sticking handle out the top, and taping around the can. This resembles the Maxwell House Coffee Container mentioned earlier. If plastic and masking tape is still not available, and time between coats is not very long, take that sopping wet rag, draping over the top of paint bucket with Paint Brush still in it. This technique works best when using Latex waterborne paints.