What are the major color fields in the painting and their role in the entire composition? Is the light optically realistic or expressive as in Matisse's painting? How Much Paint You Really Need. How much paint you will need to satisfactorily complete a paint project is determined by 2 factors. The first, paint coverage, is a familiar concept to most people. It simply concerns the square footage of surface area to be painted, and "paint coverage calculators" abound on the web. However, the second concept, paint color coverage, has a much more pronounced effect on how much paint will be needed and the cost of paint projects. Unfortunately, paint color coverage is a novel concept to many painters and, in fact, is poorly understood even by many professionals. Knowing the secrets of paint color coverage will allow you to reduce the number coats you have to apply and minimize how much paint you have to buy. "Boxing" is a good method of mixing paints. Since paint is a mixture of solids and liquids, it is important that it be mixed thoroughly before using. To do this, the greater portion of the liquid contents of the can should be poured in a clean bucket somewhat larger than the paint can. Then, with a stiff paddle, the settled pigment in the original container should be loosened and any lumps broken up. After this, mix the material in the container thoroughly, using a figure 8 motion, and follow with a lifting and beating motion. Continue stirring the mixture vigorously while slowly adding the liquid that was previously poured off the top. Complete the mixing by pouring the paint back and forth from one container to the other several times until the entire amount is of uniform consistency.
Is some color dominating? It's funny, but many of the colors that a paint company puts in its line would never look good painted on any wall. The colors are 100% used to grab your attention when you are perusing paint displays. People are helplessly attracted to bright colors; they are much more eye-catching and far more interesting to our brains. Now that you have primed the airless, make sure that there isn't a tip in the gun of the airless and bring it over to the empty bucket. Since there is typically cleaning solution in the hose leading to the gun it is a good idea to spray that out until you see thick paint coming out. Once you have thick paint coming out you may put your tip back in. Remember that the tip will have an arrow on one side of the handle that shows which direction it must be in, in order to spray. Since the trim is the first to go, the main body of the home will be shortly behind requiring painting. If the trim was recently painted, and a few years later the body is ready for paint, all the trim will need to be covered, commonly referred to as masking off. Masking off expends time, labor and material, which adds to the bottom line cost to the remaining 40%, typically costing an additional 25% for masking trim. Thus costing 25% more after both trim and body portions are painted in separate years.